Tel : 0086-(0632)-5810219
Email:info@uni-techmachinery.com
Home About us Product Technology Catalogue Feedback Contact us
　Location：Home >> Dividing Head >> F11,F12 series universal,semi-universal dividing head
F11,F12 series universal,semi-universal dividing head
F11,F12 series universal,semi-universal dividing head

F11,F12 series universal,semi-universal dividing head

Main features:

F11SERIES UNIVERSAL DIVIDING HEAD

1. The universal dividing head,Type F11100A,F11125,F11160A,F11200A is one of the most importantattachment for milling machine. With the help of this dividing head theworkpiece held between centers, or on a chuck can be rotate to any angle asesired and the periphery of a workpiece can be divided into any divisions ofequal parts. By means of all kinds of cutters, the dividing head can also helpmilling machine to perform the milling operation for flute spur gear, spiralgear, spiral flute, Archimedean cam, helical flute and etc.

2. The dividing head, is equippedwith a face plate that can be mounted onto the spindle nose. The workpiece canbe mounted on the face plate, thus, cutting can be carried out on 4-sides of aworkpiece.

3. F11125C,F11160C is designed for the customersspecial needed, the shafting is improved to support heavy load.

4. The universal dividing head,type F11100AL, F11125AL, F11160AL is the same as of the structures and the operationhandle is setted on the left.

 

F12SERIES SEMI-UNIVERSAL DIVIDING HEAD

1. Type F12 series semi-universaldividing head is one of the most important attachment for milling machine. Itcan be used for simple indexing and divide circle into any equal parts, etc.

2. The F12 series with right hand wheel.
Specifications Recommend accessories Compared products Operation Manual   　　Inquiry  

F11SERIES UNIVERSAL DIVIDING HEAD


                               Specifications                                                            Items
F11100A F11125A F11160A F11200A
Center hight mm 100 125 160 200
Swivel angle of spindle from horizontal to upward ≤95°
Horizontal position(downward) ≤5°
Rotating angle of spindle for one complete revolution of dividing handle 9°（540grad.,1'each)
Min.reading of vernier 10''
Worm gear ratio 1:40
Taper of spindle bore MT3 MT4
Width of locating key.mm 14 18
Diameter of short taper of spindlenose for mounting flange mm 41,275 53,975 53,975 53,975
Numbers of hole in dividing plate 1st plate 24,25,28,30,34,37,38,39,41,42,43
2nd plate 46,47,49,51,53,54,57,58,59,62,66
Change gear Module 1.5 2
Teeth numbers 25,30,35,40,50,55,60,70,80,90,100
Individual indexing error of the spindle for one complete revolution of dividing handle ±45‘’
Cumulate error at any 1/4 periphery of spindle ±1‘’
Max.bearing kg 100 130 130 130
Net weight kg 67 101.5 113 130
Gross weight kg 79 111.5 123 140
Overall dimensions mm 616×465×265 635×530×530 710×535×342 710×535×342

Model A B C D E F G H L M N O P
F11100A 162 14 102 87 186 95 116 100 93 54.7 30 100 100
F11125A 209 18 116 98 224 117 120 125 103 68.5 34.5 100 125
F11160A 209 18 116 98 259 152 120 160 103 68.5 34.5 100 160
F11200A 209 18 116 98 299 192 120 200 103 68.5 34.5 100 200

F12SERIES SEMI-UNIVERSAL DIVIDING HEAD


                               Specifications                                                            Items
F12100 F12125 F12160 F12200
Center hight mm 100 125 160 200
Swivel angle of spindle from horizontal to upward ≤95°
Horizontal position(downward) ≤5°
Rotating angle of spindle for one complete revolution of dividing handle 9°（540grad.,1'each)
Min.reading of vernier 10''
Worm gear ratio 1:40
Taper of spindle bore MT3 MT4
Width of locating key.mm 14 18
Diameter of short taper of spindlenose for mounting flange mm 41,275 53,975 53,975 53,975
Numbers of hole in dividing plate 1st plate 24,25,28,30,34,37,38,39,41,42,43
2nd plate 46,47,49,51,53,54,57,58,59,62,66
Individual indexing error of the spindle for one complete revolution of dividing handle ±45‘’
Cumulate error at any 1/4 periphery of spindle ±1‘’
Max.bearing kg 100 130 130 130
Net weight kg 57 83.5 100 130
Gross weight kg 69 96 114 140
Overall dimensions mm 610×495×255 536×460×310 710×505×342 710×535×342

Model A B C D E F G H L M N O P
F12100 162 14 102 87 186 95 116 100 93 54.7 30 100 100
F12125 209 18 116 98 224 117 120 125 103 68.5 34.5 100 125
F12160 209 18 116 98 259 152 120 160 103 68.5 34.5 100 160
F12200 209 18 116 98 299 192 120 200 103 68.5 34.5 100 200




UNI-TECH 2015-2016
ROOM 1004 XINXING BUSINESS BUILDING, TENGZHOU, SHANDONG, CHINA
Tel:0086-(0632)-5810219 Fax:0086-(0632)-5810216
Email:info@uni-techmachinery.com