UNIVERSAL CYLINDRICAL GRINDING MACHINE M1463

1.The left and right guide rail adopts P-V structure, which is scraped by high precision manual, sothat the whole
system products have high precision and high stability.
2.The front and rear feed guide rail of grinding wheel can choose roller and wire rail structure
3.Classic control mechanism, simple, safe and reliable.
4.M1350, M1450, M1363 series worktable and grinding wheel guide rail adopts high stablehydrostatic guide rail, high
rigid dynamic and static pressure spindle.
5.Universal workhead can be adjusted at any Angle within 90 degrees counterclockwise to adapt tochuck grinding
internal and external conical workpiece.

Specifications

Recommend accessories

Compared products

Operation Manual

　　Inquiry

Description		Unit	MW1320	MW1420	M1432B	M1350	M1450	M1463
l General capacity
Distance between centers		mm	500、750	500、750	1000、1500/2000/3000	1500、2000、3000	1500、2000、3000、4000	2000、3000、4000、5000
Center height		mm	135	135	180	270	270	335
Dia. Ground(O.D)		mm	5~200	5~200	8~320	25~500	25~500	30～630
Dia. Ground(I.D)		mm	－	25~100	30~100	－	30~200	30-200
Max. length ground(O.D)		mm	500、750	500、750	1000、1500	1500、2000、3000	1500、2000、3000	3000、4000、5000
Max. length ground(I.D)		mm	－	125	125	125	320	320
Max. weight of work piece		Kg	－	100	150	1000	1000	3000
l Workhead
Swiveling angle		°	－	+90°	+90°	+90°	+90°	+90°
Center taper(MT)		MT	4	4	4	6	6	(metric)80＃
Spindle speed		r/min	50HZ:25~380	50HZ:25~380	50HZ:25~220	50HZ:18~140	50HZ:20~224	50HZ:20-224
l Wheel head
Wheel spindle speed		rpm	1335	1670	1670	870	1330/665	740
Wheelhead rapid travel		mm	50	50	50	100	100	100
Max. travel		mm	205	150	246	437.5	370	450
Swiveling angle		°	+10°	±30°	±30°	±30°	-30°	-30°
Hand feed per. rev		mm	rough: 2 fine:0.5			rough:4 fine：0.5	rough:4 fine：0.5	rough:6 fine：0.5
Hand feed per gra.		mm	rough:0.01 fine:0.0025			rough:0.02 fine:0.0025	rough:0.02 fine:0.0025	rough:0.02 fine:0.0025
wheel size		mm	500×50×203	400×50×203	400×50×203	750×75×305	500×75×305	900×75×305
Max. dimension of wheel(OD×W×ID)		mm	500×50×203	400×50×203	400×50×203	750×75×305	500×75×305	900×75×305
Wheel peripheral velocity		mm	35	35	35	35	35/17.5	35/17.5
l Internal grinding device
Spindle speed		r/min	－	10000/15000	10000	－	10000	10000
wheel size		mm	－	max: 50×25×13	max：50×25×13	－	max：175×32×32	max：175×32×32
wheel size		mm	－	min: 17×20×6	min：17×20×6	－	min： 30×25×10	min： 30×25×10
l Table
Hand feed per. rev		mm	6	6	6	5		5
Max. swiveling angle	clockwise	°	3°	3°	3°	3°(1500)、2°(2000、3000)		2°(3000)、1°(4000、5000)
Max. swiveling angle	anticlockwise	°	9°(500)、8°(750)		7°(1000)、6°(1500)	6°(1500)、5°(2000)、3°(3000)		3°(3000)、2°(4000、5000)
Longitudinal traverse speed of table		m/min	0.1~4	0.1~4	0.1~4	0.1~3	0.1~3	0.1~2.5
l Tailstock
Center tape(MT)		MT	4	4	4	4	6	(metric)80＃
30
l Motor
Wheelhead motor power		Kw	5.5	4	5.5	5.5	5/7.5	7/11
Internal grinding		Kw	1.1	1.1	1.1	1.5	1.5
Workhead motor power		Kw	0.75	1.1	1.5	1.5	4(7.5)	15
l Machine
Gross weight		t。	4 (500)、4.2 (750)	3 (500)、3.2 (750)	5.3 (1000)、6.1 (1500)	10 (1500)、11(2000)、13(3000)、16.5（4000）		18(3000)、19（4000）、24（4000）、26（5000）
cm	260×206×205(500)	235×203×205(500)	338×200×205(1000)	510×228×210(1500)		695x242x226(2000)
	Packing dimension		300×206×205(750)	275×203×205(750)	438×200×205(1500)	585×228×210(2000)		890x242x226(3000)
	785×270×210(3000)		1100x242x226(4000)
						1000X228X210(4000)		(5000)

UNI-TECH 2015-2016
ROOM 1004 XINXING BUSINESS BUILDING, TENGZHOU, SHANDONG, CHINA
Tel:0086-(0632)-5810219 Fax:0086-(0632)-5810216
Email:info@uni-techmachinery.com